|
|
|
Trailer Plugs
|
|
4-Way Flat Trailer Plugs
|
|
4-way Flat Car End, 60" Long (includes 4 scotch locks)
|
|
|
|
4-way Flat Trailer End, 12" Long
|
|
|
|
4-way Flat Trailer End, 25 Feet Long
|
|
4-way Flat Loop, 18" Long (includes 4 scotch locks)
These Can Also Be Used As Extensions
|
|
|
4-way Flat Loop, 60" Long (includes 4 scotch locks)
These Can Also Be Used As Extensions
|
|
|
5-way with Flat Pins on truck to 5-way Flat on trailer with 4' Coiled Wire (Works with 4-Way Flat Plug As Well)
|
|
|
|
4-way Flat Cover
|
|
|
|
4-way Flat Cover With LED Lights - Shows You If The Plug Is Operating Correctly
|
|
|
5 -Way Flat Trailer Plugs
|
|
5-way Flat Plug Car End
|
|
|
|
5-way Flat Plug Trailer End
|
|
|
5-way Flat 72" Loop - Has 5-way car end & 5-way trailer end
|
|
|
5-way with Flat Pins on truck to 5-way Flat on trailer with 4' Coiled Wire
|
|
|
|
5-way Flat Cover
|
|
|
|
4-Way Round Trailer Plugs
|
|
4-way Chrome Plug Car End
|
|
|
|
4-way Chrome Plug Trailer End
|
|
|
|
4-way Die-Cast Plug Car End
|
|
|
|
4-way Die-Cast Plug Trailer End
|
|
|
6-Way Round Trailer Plugs
|
|
6-way Round Car End
|
|
|
|
6-way Round Trailer End
|
|
|
|
6-way Molded Trailer Pre-Wired Cable, 8 feet long
|
|
|
|
6-Way Rectangle Trailer Plugs
|
|
6-way Rectangle Car End (5 covered & 1 Exposed)
|
|
|
|
6-way Rectangle Trailer End (5 Exposed & 1 Covered)
|
|
|
9-Way Round Trailer Plugs
|
|
9-way Round with Round Pins Plastic Car End
|
|
|
|
9-way Round with Round Pins Plastic Trailer End
|
|
|
Circuit Testers
|
|
Hooked Circuit Test Light - For Testing Wires
|
|
|
|
4-way Flat Tester
|
|
|
|
7-way RV (Flat Pins) Plug Tester
|
|
|
|
7-way with Round Pins Plug Tester
|
|
|
Lite Convertors
|
|
Light Converter w/ 4-way Flat Plug (for vehicles with separate brake light and turn signals)
|
Click for Instructions for DT_119130 Modulite
|
|
Light Converter w/ 4-way Flat Plug (for vehicles with separate brake light and turn signals) with
Integrated Circuit Protection.
- Protects Both Trailer and Tow Vehicle From Short Circuit Conditions That Damage Sensitive Wiring Components
- If Short Occurs, The Protector Can Be Reset Once The Wiring Problem Has Been Corrected
- Protects up to 4 Amps Per Circuit
|
|
|
Modulites
- Uses The Vehicle's Battery To Provide The Power To Run The Lights On The Trailer
- Virtually Eliminates Additional Electrical Draw On The Vehicles Taillight Circuits
- Required For Vehicles That Cannot Handle The Extra Amperage Pulled By The Trailer (i.e., Vehicles With Lamp Out Sensors,
Special Computer Systems, etc.
|
|
Modulite w/ 4-way Flat Plug
|
Click for Instructions for DT_119146 Modulite
|
|
Modulite w/ 4-way Flat Plug With Circuit Protection
- Rated Up To 2.1 amps for Turns/Stops Circuits and 7.5 amps for the Taillight Circuit
- Has Integrated Automatic Re-settable Short Circuit and Overload Protection, to Safeguard Itself and the Tow Vehicle From Sorts and
Installation Mishaps
- May Be Used On 2 or 3 Wire Systems
- No Converter is Required
- Optional Modulite Installation Wiring Kit Can Be Purchased Here
|
Click for Instructions for DT_119176 Modulite
|
Modulite w/ 4-way Flat Plug With Circuit Protection and Includes Modulite Wiring Kit
- Same As The DT_119176 Except It Includes The Wiring Kit From The DT_118151 (Fuse Holder, Wire & Connectors)
- Rated Up To 2.1 amps for Turns/Stops Circuits and 7.5 amps for the Taillight Circuit
- Has Integrated Automatic Re-settable Short Circuit and Overload Protection, to Safeguard Itself and the Tow Vehicle From Sorts and
Installation Mishaps
- May Be Used On 2 or 3 Wire Systems
- No Converter is Required
|
Click for Instructions for DT_119186 Modulite
|
Modulite HD w/ 4-way Flat Plug Wit Circuit Protection
- Handles up to 4.2 amps for Turn/Stop Circuits & 7.5 amps for the Taillight Circuits
- Has Integrated Automatic Re-settable Short Circuit and Overload Protection, to Safeguard Itself and the Tow Vehicle From Sorts and
Installation Mishaps
- Interprets/Decodes Multiplex Signal Inputs (especially BMW & Mercedes Applications)
- May Be Used On 2 or 3 Wire Systems
- No Converter is Required
- Optional Modulite Installation Wiring Kit Can Be Purchased Here
|
Click for Instructions for DT_119190 Modulite
|
Modulite HD w/ 4-way Flat Plug Wit Circuit Protection and Includes Wiring Kit
- Same As The DT_119190 Except It Includes The Wiring Kit From The DT_118151 (Fuse Holder, Wire & Connectors)
- Handles up to 4.2 amps for Turn/Stop Circuits & 7.5 amps for the Taillight Circuits
- Has Integrated Automatic Re-settable Short Circuit and Overload Protection, to Safeguard Itself and the Tow Vehicle From Sorts and
Installation Mishaps
- Interprets/Decodes Multiplex Signal Inputs (especially BMW & Mercedes Applications)
- May Be Used On 2 or 3 Wire Systems
- No Converter is Required
|
Click for Instructions for DT_119191 Modulite
|
Wiring Kit for Installing all Modulites, includes
- Fuse Holder and Fuse
- Wire to be Run From Engine to Modulite
|
|
|
|
Trailer Plug Mounting Systems
|
|
The Following Brackets Can Be Mounted to the Bumper or They Can Be Connected to the Hitch with
the Attachement Bracket (Piece 2)
|
|
|
4-way Flat Connector Bracket (Piece 1), Includes Screws and Nuts. Only Works With 4-way Flat Plugs
Made by Draw-Tite.
|
|
|
|
5-way Flat Connector Bracket (Piece 1), Includes Screws and Nuts. Only Works With 5-way Flat Plugs
Made by Draw-Tite.
|
|
|
4, 5 and 6-way Round Connector Bracket (Piece 1), Includes Screws and Nuts
|
|
|
|
7-way Connector Bracket (Piece 1), Includes Screws and Nuts
|
|
|
|
Attachment Bracket, Long (Piece 2), Includes Clamp. Generally Used to Mount Plug To Top of Hitch.
|
|
|
|
Attachment Bracket, Short (Piece 2), Includes Clamp. Generally Used to Mount Plug To Bottom of Hitch.
|
|
|
|
6 & 7 Way Mounting Box for Hitches with 2 1/2" Square Cross Tubes, Includes Clamp
|
|
|
|
6 & 7 Way Mounting Box for Hitches with 3" Square Cross Tubes, Includes Clamp
|
|
|
6 & 7 Way Mounting Box for Round Tube Hitches and Square Cross Tubes Which Are Slightly Hidden, Includes Clamp
|
|
|
4-way Flat Storage Box
|
|
|
|
Miscellaneous
|
Dielectric Grease
- Using Dielectric Grease on Electrical Connectors Helps Prevent Corrosion and Increases Reliability
|
|
|
