|
We have a huge inventory of Draw-Tite, Hidden Hitch, Reese, Curt
and Valley trailer hitches. Below, we discuss each
type of hitch.
All our trailer hitches are designed for specific vehicles. We do not carry generic hitches (other than
the step bumper hitches). All the styles of hitches we carry are described below. Gross Trailer Weight (GTW) is the weight of the trailer plus its content. Tongue Weight (TW) is the amount of weight exerted directly onto the ball.
|
Our Hitch Selection Guide is Fully Complete. However, if you do not find your vehicle listed,
you can E-mail us, Request An Estimate,
or call us:
- In the Denver Metro Area at (303) 904-1558
- Or Toll Free at 1-877-66HITCH (664-4824).

This Will Also Allow You To Get Instructions For The Hitch, As Well As Purchase The Hitch Online.
If You Would Like To Make An Appointment For An Installation, Please Call Us at (303) 904-1558.
|
|
Draw-Tite is the leader when it comes to the design and manufacturing of towing systems and trailer hitches. Draw-Tite hitches carry a nationwide, limited LIFETIME WARRANTY for as long as the purchaser owns the vehicle on which they were installed.
We also carry Hidden Hitch, Reese, Curt
and Valley which carries the same warranty.
|
We carry Curt hitches for those import vehicles that do not have an application by any other
manufacturer. Moreover, we have the Reese Titan and Super Hitch series hitch for those extra heavy loads (12,000 - 14,000 lb.).
We carry hitches for your:
- Car
- Cross-Over
- SUV
- Downsized Pickup
- Full Size Pickup
Click Here For the Trailer Hitch Finder To Find the Hitch For Your Vehicle, As Well
As The Installation Instructions
|
|
Valley Class III Receiver with Integrated Wiring
- 3,500-5,000 lbs. Gross Trailer Weight, 300-500 lbs. Tongue Weight as a hitch alone
- Up to 8,000 lbs. Gross Trailer Weight, up to 800 lbs. Tongue Weight with Weight-Distribution system
- 2" square receiver tube
- All frame attachment
- Black Finish
- Includes T-Connector Wiring Harness Which Then Connects To Plug Integrated Into trailer Hitch
- Limited Lifetime Warranty
- Does Not include ball mount
|
Click Here For the Valley Trailer Hitches With Integrated Wiring
|
Class IV Ultra Frame Receiver, For Heavy Duty Towing
- Designed for full-size trucks, vans and utility vehicles with full frames and heavy-duty suspensions
- 10,000 lbs. Gross Trailer Weight, up to 1,000 lbs. Tongue Weight as a hitch alone
- 12,000 lbs. Gross Trailer Weight, up to 1,200 lbs. Tongue Weight with Weight-Distribution system
- 2" square receiver tube
- All frame attachment
- Black Finish
- J-Pin Ready
- Limited Lifetime Warranty
|
Click Here For the Trailer Hitch Finder To Find the Hitch For Your Vehicle, As Well
As The Installation Instructions
|
Class V Reese Titan Frame Receiver, For Serious Towing and For Trunks With Overhanging Campers
- Designed for full-size long wheel base trucks, vans and utility vehicles with full frames and heavy-duty suspensions
- 12,000 lbs. Gross Trailer Weight as a hitch alone
- 14,000 lbs. Gross Trailer Weight with Weight-Distribution system
- 2 1/2" square receiver tube
- All frame attachment
- Pin, clip and receiver tube cover included
- Welded Electrical Bracket Included
- Black Finish
- Limited Lifetime Warranty
|
Click Here For the Trailer Hitch Finder To Find the Hitch For Your Vehicle, As Well
As The Installation Instructions
|
SuperHitch Frame Receiver- Strongest Hitch Around & Especially Useful Oversized Slide In Campers
- High Strength Extended Hitch System Engineered for Safely Towing All Types of Trailers Behind Your Truck and Camper
- With a Towing Capacity of 12,000 lbs. With an Extension, (17,000 lbs. without) the SuperHitch is Rated The Strongest in
The Industry
- 15,000 lbs. Gross Trailer Weight as a hitch alone
- 17,000 lbs. Gross Trailer Weight with Weight-Distribution system
- Two 2" square receiver tubes
- All frame attachment
- Black Finish
- Limited Lifetime Warranty
|
Click Here For The SuperHitch Receiver Hitches
|
Front Mounted Receiver Hitches
Front Mounted Receiver
- Convenient mounting point for a variety of 2" hitch mounted accessories
- Parking a trailer
- Snow Plow
- Use a bike rack or cargo carrier while towing a trailer
- Front Mounted winch
- Spare Tire Carrier
- Service Step
- 2" square receiver tube
- All frame attachment
- Black Finish
- Limited Lifetime Warranty
|
Click Here For The Front Receiver Hitches
|
Motorhome Receiver Hitches
Motorhome Hitch by Draw-Tite
- Simple Three-Piece Construction Makes Assembly and Installation Fast and Easy
- No Welding Required
- Attachment Hardware Included
- 2" Receiver
- 5,000 lb. Gross Weight and 500 Lb Tongue Weight as Hitch Alone
- 6,000 lb. Gross Weight amd 750 Lb Tongue Weight With A Weight Distribution System
- For Motorhomes with Chassis 24" to 46" Wide
- Black Finish
- Click for Instructions for Draw-Tite Motorhome Hitch
|
|
Motorhome Hitch by Valley
- Simple Three-Piece Construction Makes Assembly and Installation Fast and Easy
- No Welding Required
- Attachment Hardware Included
- 2" Receiver
- 5,000 lb. Gross Weight and 500 Lb Tongue Weight as Hitch Alone
- 6,000 lb. Gross Weight amd 750 Lb Tongue Weight With A Weight Distribution System
- For Motorhomes with Chassis 24" to 46" Wide
- Black Finish
- Click for Instructions for Valley 73740
|
Work Truck Hitches
Ultra Frame Receiver
- These new hitches are designed specifically to address the heavy towing needs of those in the Truck Outfitter/Service
Body industry
- Welding Required
- 1600/16,000 lbs.(TW/GTW)
- 4 Models
|
|
Super Titan Receivers
- These new hitches are designed specifically to address the heavy towing needs of those in the Truck Outfitter/Service
Body industry
- Super Titans can carry the largest capacity of all the hitches offered by Reese
- They provide a 3" square tube receiver
- This hitch even comes with a 3" ball mount -- what a deal
- When purchased with the reducer sleeve, the Super Titan can handle all your customer's 2" accessories!
- Welding Required
- Adjustable cross tube for proper height
- Two electrical plug and air brake hook up mounting locations for easy trailer attachments
- For frame widths from 34" to 34-1/2"
- 3 Models
- 20K Weld-On with 3" Sq. Ball Mount, 2-5/16" Ball, Pin & Clip
- 3000/20,000 lbs.(TW/GTW)
- Note: 10" from bottom of frame to bottom of receiver tube
- Click for Instructions for DT38023
|
- 20K Weld-On with 3" Sq. Ball Mount, 2-5/16" Ball, Pin & Clip
- 3000/20,000 lbs.(TW/GTW)
- Note: 14 1/2" from bottom of frame to bottom of receiver tube
- Click for Instructions for DT38123
|
- 25K Weld-On with 3" Sq. Ball Mount, 2-5/16" Ball, Pin & Clip
- 4000/25,000 lbs.(TW/GTW)
- Dual Receiver Model
- Note:14-1/2" from bottom of frame to bottom of dual stacked receiver tube
- Click for Instructions for DT38124
|
Super Titan Adapter, reduces receiver tube from 3" to 2" - 1200/12,000 lbs.(TW/GTW)
|
|
|
Step Bumper Hitches
- Mounts Directly To The Bottom of the Step Bumper (Must be Flat)
- Drilling Is Required For Two (2) of the Holes
- Plate Size is 11" Wide by 4" Deep
- For Bumpers That Have The Extra Two Holes With Dimensions of between 7 7/8" and 9 1/4" apart,
this Hitch Has a Capacity of 5,000 lb.
|
|
- Mounts Directly To The Bottom of the Step Bumper (Must be Flat)
- Drilling Is Required
- Plate Size is 8" Wide by 4" Deep
- For Step Bumpers Without Holes (requires 4 drilled holes), this Hitch Has a Capacity of
3,500 lbs.
|
|

This Will Also Allow You To Get Instructions For The Hitch, As Well As Purchase The Hitch Online.
|