Pintle Hooks and Pintle Accessories
|
Pintle Hooks
|
|
Pintle Hook and Ball Combination
- This Allows You To Tow Both a Trailer With a Lunette Ring And One With a Standard Coupler
- Comes in 3 Combinations With a 16,000 lbs. Capacity (Chrome Ball) and Includes the Bolts:
- Pintle Hook With 1 7/8" Ball
- Pintle Hook With 2" Ball
- Pintle Hook With 2 5/16" Ball
- We Have Replacement Balls So That You Can Tow a Trailer Requiring Any Size Ball
- Can Be Mounted To Pintle Adapters To Be Used In a 2" Receiver
|
|
Pintle Adapters
- Allows You To Utilze a Pintle Hook or Pintle/Ball Combination in a 2" Receiver
- Comes in 2 Towing Capacities:
- 5,000 lbs. for 2" Receiver - 3 holes per side for adjustment
- 10,000 lbs. for 2" Receiver - 4 holes per side for adjustment
- 10,000 lbs. with 12" length for 2" Receiver - 3 holes per side for adjustment
- 8,000 lbs. with 12 1/2" drop for 2" Receiver - 7 holes per side for adjustment
- 12,000 lbs. for 2 1/2" Receiver - 3 holes per side for adjustment
- The Hitch Pin is Not Included
|
|
Hitch Adapters and Anti-Rattle Products
1 1/4" to 2" Adapter
- This Converts a 1 1/4" Receiver to a 2" Receiver
- One Piece Design
- Only To Be Used For A Bike Rack
|
|
1 1/4" to 2" Adapter with 5" Riser
- This Converts a 1 1/4" Receiver to a 2" Receiver
- Raises or Lowers Height of Carrier 5 3/4"
- Adds 12" in Distance From Hitch
- One Piece Design
- Only To Be Used For A Bike Rack
- Currently OUT OF STOCK
|
|
2" to 1 1/4" Adapter
- This Converts a 2" Receiver to a 1 1/4" Receiver
- One Piece Design
- Only To Be Used With A Bike Rack
|
|
2" Combo Stack Bar
- For 2" Receivers Only
- Allows For Mounting Bike Carriers While Towing
- 12" From Hole To Hole On Bottom Tube
- 7" From Hole In Receiver to First Contact of Upper Tube
- Two 2" Tubes
- Upper Is For Accessories, Which is 4 3/4" Above the Bottom One
- Lower Is For Towing
- You Lose 1/3 of Both The Towing Capacity and Tongue Weight of Your Hitch
- Corrosion Resistant Black Epoxy Finish
|
|
Valley Anti-Rattle Device
- Valley Anti-Rattle Device - One Bolt to Tighten with a Jam Nut
- For a 1 1/4" Receiver
- For a 2" Receiver
|
|
Brophy Anti-Rattle Device
- Brophy 2" Receiver Stabilizer
- Easy To Use, Simply Tighten The Two Wing Knobs
- Needs 1" of Clearance to Mount
-
|
|
Silent Hitch Pin With Lock
- Removes All The Movement Between The Hitch And Any Items In It (i.e. Ball Mounts, Bike Racks, Cargo Carriers, etc.)
- It Makes The Ball Mount/Receiver Connection Completely Rigid
- Available Only for 2" Receivers
- Two Keys and Wrench Included For Easy Installation
- Cannot Be Used With Solid Shank Ball Mounts
|
|
Helper Springs
Dayton Helper Springs
- Easily Installs With Hand Tools
- Improves Cornering Stability
- No Welding or Drilling Required
- Boxed Complete With All Attachment Hardware
- Applications Available for Most Domestic & Imported Trucks, Vans, Motorhomes and SUVs
- UPS Shippable
- $233.60
- Call For Specific Application
|
|
Roadmaster Active Suspension
- Improves Driver Control, Safety and Stability With or Without a Load
- Absorbs the Load, Rather Than Resisting it, Thereby Insuring a More Comfortable and Safe Ride
- Eliminates Sway and Reduces Roll on Corners
- Applications for Most Domestic and Imported Trucks, Vans, Motorhomes and SUVs
- Reduces Axle Wrap
- Installs Easily, No Clamps, Welding or Drilling
- Does Not Obstruct Movement of Vehicle Leaf Springs
- MK I Fits the following Models:
- 1994-97 Honda Passport 2 & 4 WD
- 1991-97 Isuzu Rodeo 2 & 4 WD
- 1986-96 Isuzu Trooper 2 & 4 WD
- 1986-96 Jeep Wrangler 4 WD
- 1984-94 Mazda Pickup B Series 2 WD
- 1986-99 Nissan Pickup 4 Cylinder 2 WD
- 1986-99 Toyota Pickup and Tacoma 2 WD
-
- MK I (C) Fits the following Models:
- 1984-99 Chevy S-10 Pickup 2 & 4 WD
- 1984-96 Chevy Blazer Downsized 2 & 4 WD
- 1984-99 GMC Sonoma Pickup 2 & 4 WD
- 1984-96 GMC Jimmy 2 & 4 WD
- 1996-99 Isuzu Pickup 2 & 4 WD
- 1991-96 Oldsmobile Bravada 4 WD
-
- MK II Fits the following Models:
- 1983-95 Isuzu Pickup 4 WD
- 1986-94 Mazda Pickup B Series 4 WD
- 1966-96 Ford Bronco 2 & 4 WD
-
- MK II (A) Fits the following Models:
- 1983-99 Ford Ranger Pickup 2 & 4 WD
- 1995-99 Mazda B Series Pickup 2 & 4 WD
- 1984-90 Ford Bronco II 2 & 4 WD
-
- MK II (XD) Fits the following Models:
- 1973-99 Dodge Ram D100/1500 Pickup 2 & 4 WD
- 1992-99 Dodge 1500 Van 2 WD
-
|
|
Home | Accessories |
Bike and Cargo Racks | Brake Controls |
5th Wheel Hitches
Gooseneck Hitches | Hitch Covers |
Tow Bars | Trailer Accessories
Trailer Hitches | Truck Accessories |
Wiring Products | Request Estimate
Contact Us
|