|
Motorcycle Carriers
Rage Motorcycle Carriers
Rage AMC-400
- Requires A 2" Receiver
- Can carry up to a 400 lb. motocross bike without the need for a trailer or even a pick up truck
- The system includes a loading ramp and also a anti-tilt locking device to prevent sway of the carrier when it is loaded
- The rugged surface has a 16” opening for the front tire to simply drop into and included attaching points to tie down
the bike with straps
- Features:
- Lightweight all aluminum design
- Fits in any 2 inch receiver
- Includes aluminum loading ramp
- Loading ramp attaches to carrier when traveling
- Carries up to a 400 lb. motorcycle
- 2 integrated tie down loops
- Assembles in seconds
- Weighs 36 lbs.
|
|
Rage AMC-600-2
- Requires A 2" Receiver
- Load up & haul 2 dirt bikes with our hitch mounted double motorcycle carrier
- The AMC-600-2 is constructed of aluminum with a steel powder coated main hitch tube for added support
- An included ramp is used to load up bikes, and when not in use, the ramp secures to the carrier
- Included with the hitch mounted carrier is a anti-tilt device for extra stability
- The carrier can attach to 2” square class III, IV, V hitch receivers
- Features:
- Lightweight all aluminum design
- Fits in any 2 inch receiver
- Includes aluminum loading ramp
- Loading ramp attaches to carrier when traveling
- Carries up to a 600 lb. motorcycle
- 2 integrated tie down loops
- Designed for dirt bikes or motocross bikes
- Weighs 69 lbs.
- Track Length 75", Track Width 5 1/2", Ramp Length 45 1/2"
|
|
Rage MX-600
- Transport a dirt bike or a scooter with this heavy duty 600 lb. capacity motorcycle carrier
- The MX-600 carrier is constructed of steel and has a black powder coated finish for protection
- The carrier will fit into a 2” class III or greater receivers and can safely carry 600 lbs.
- Included with this carrier is a 5’ long loading ramp which attaches to the carrier when not in use
- The carrier features integrated loops for tie down straps and removable pins to adjust the size of the front wheel
channel from 8”-12” for either a scooter or dirt bike
- Also included is an anti-tilt device and pinch bolt to eliminate carrier wobble.
- Features:
- Durable steel frame with black powder coating
- Fits in any 2 inch receiver
- Includes 5' loading ramp
- Loading ramp attaches to carrier when traveling
- Front tire cradle adjusts from 8"-12" for dirt bikes or scooters
- Carries up to 600 lbs.
- 2 integrated tie down loops
- Pinch bolt removes receiver slack
- Designed for dirt bikes or scooters
- Weighs 62 lbs.
- Track Length 76 3/4", Track Width 5 1/2", Ramp Length 60"
|
|
Rage SMC-600
- The SMC-600 motorcycle carrier is designed to transport motorcycles up to 500 lbs. on a 2" class III or greater hitch
receiver
- The carrier features a 72" long ramp for loading up bike and an integrated wheel chock for front wheel stability
- Durable, yet lightweight, the carrier frame is constructed of black powder coated steel while the carrier track is
constructed of aluminum
- An included anti-tilt device keeps the carrier stable
- Features:
- Durable steel black powder coated frame
- Aluminum carrier track
- Fits in any 2 inch class III or greater receiver
- Includes 6' loading ramp
- Loading ramp attaches to carrier when traveling
- Carries up to 500 lbs.
- Integrated wheel chock for added motorcycle stability
- Anti-tilt device included for carrier stability
- Weighs 69 lbs.
- Track Length 78 3/4", Track Width 8", Ramp Length 72"
|
|
Tilt-A-Rack Motorcycle Carriers
- Requires A 2" Receiver
- Locks Level For Safe Transportation
- Tilt Feature Eliminates the Need For Separate Ramps
- All Aluminum Construction For Lasting Durability and No Rusting
- Designed For Transporting a Wide Range of MotoCross, Enduro, and Other Off-Road Bikes
Holds Up To 400 lbs. (not to exceed the tongue weight of your hitch)
Dimensions: 72" x 6" x 2"
|
Holds Up To 600 lbs. (not to exceed the tongue weight of your hitch)
Dimensions: 84" x 8" x 2"
|
- Optional Accessories:
Double Cycle Add-On - For 410ACR Only
- Provides For a Combined Weight of Up To 700 lbs. (not to exceed the tongue weight of your hitch)
- Note: Trailer Hitch Must Be a Class IV or V, and the Vehicle Must Be 1/2 Ton or Greater
|
Dirt Bike Cover
- Made With Heavy Duty Polyester with P.V.C. Backing to Provide Extreme Water Resistance
- Easy Snap On/Off Tie Down System
- Cover Can Be Used During Transport, In Storage, or Just Out In The Field
|
|
|
Versa-Haul Motorcycle Carriers
Versa-Haul Single Motorcycle Carrier With Ramp and 2" Towing Receiver
- Requires A 2" Receiver
- Manufactured with All-steel Construction and Powdercoated for Durability
- Includes 60" Ramp
- Length of Carrier Rail is 71.5"
- Width of Carrier Rail is 6.5"
- Designed For Transporting a Wide Range of Motorcycles
- Adjustable Wheel Stop
- 4 Retractable Tie-Down Bars
- The Rack Has a 2" Receiver On The End of It For Light Duty Towing. The Max Towing Weight
is 3,000 lbs. (Not to Exceed the Towing Capacity of Your Hitch)
- Helix, Reflex, and Gold Wing Scooters Cannot Be Carried With This Rack. The VH_Sport Below
Should Be Used
- Holds Up To 500 lbs. (Not to Exceed the Tongue Weight of Your Hitch)
- Optional Accessories:
- Dirt Bike Cover
- Made With Heavy Duty Polyester with P.V.C. Backing to Provide Extreme Water Resistance
- Easy Snap On/Off Tie Down System
- Cover Can Be Used During Transport, In Storage, or Just Out In The Field
|
|
Versa-Haul Double Motorcycle Carrier With Ramp
- Requires A 2" Receiver
- Manufactured with All-steel Construction and Powdercoated for Durability
- Includes 60" Ramp
- Length of Carrier Rail is 71.5"
- Width of Carrier Rail is 6.5"
- Designed For Transporting a Wide Range of Motorcycles, Including Those With Tires Up To 5 1/2" Wide
- Adjustable Wheel Stop
- 4 Retractable Tie-Down Bars
- Helix, Reflex, and Gold Wing Scooters Cannot Be Carried With This Rack. The VH_Sport Below
Should Be Used
- Carries Two Motorcycles and Holds Up To 500 lbs. Per Rail (Requires a Class IV Trailer Hitch)
- Optional Accessories:
- Dirt Bike Cover
- Made With Heavy Duty Polyester with P.V.C. Backing to Provide Extreme Water Resistance
- Easy Snap On/Off Tie Down System
- Cover Can Be Used During Transport, In Storage, or Just Out In The Field
|
|
Versa-Haul Single Sport Motorcycle With Ramp and 2" Towing Receiver
- Requires A 2" Receiver
- Manufactured with All-steel Construction and Powdercoated for Durability
- Includes 71" Ramp
- Length of Carrier Rail is 77.5"
- Width of Carrier Rail is 8"
- Designed For Transporting a Wide Range of Motorcycles
- Adjustable Wheel Stop
- 4 Retractable Tie-Down Bars
- The Rack Has a 2" Receiver On The End of It For Light Duty Towing. The Max Towing Weight
is 3,000 lbs. (Not to Exceed the Towing Capacity of Your Hitch)
- Especially Useful For Helix, Reflex, and Gold Wing Scooters
- Holds Up To 600 lbs. (Not to Exceed the Tongue Weight of Your Hitch)
- Optional Accessories:
- Dirt Bike Cover
- Made With Heavy Duty Polyester with P.V.C. Backing to Provide Extreme Water Resistance
- Easy Snap On/Off Tie Down System
- Cover Can Be Used During Transport, In Storage, or Just Out In The Field
|
|
Brophy Motorcycle Carrier
Brophy Economical Motorcycle Hauler & Ramp
- For 2" Receiver
- Holds Up To 500 lbs.
- Carries 1 Motorcyle
- Weighs 90 lbs.
- Bolt Together Design
- Includes Ramp
- Tough Powder Coat Finish
- Optional Accessories:
- Dirt Bike Cover
- Made With Heavy Duty Polyester with P.V.C. Backing to Provide Extreme Water Resistance
- Easy Snap On/Off Tie Down System
- Cover Can Be Used During Transport, In Storage, or Just Out In The Field
|
|
Optional Carrier Accessories
|
|
|
Blue Ox SportLoader
SportLoader
- One person loading and unloading
- Utilizing a 12-volt Motor, The Front Tire of the Motorcycle is Clamped Into A Cradle and The
Cradle is then Pulled Up The Channel Into The Bed
- Stable base for cycle (approximately .1” off the bed)
- Removable ramp extensions store in pickup bed
- No modifications to the pickup box or wiring required.
- Works With Both Long Beds & Short Beds
- $2,895.00
|
|
|