Jacks
Fulton Tongue Jacks
- Includes Triangular Mounting Bracket for Easy Bolt-On or Weld-On Mounting
Top Wind with 2,000 lb. Capacity
- Travel of 15"
- Top is 12.2" Above Triangle Platform
- Fully Retracted is 8.8" Below Triangle Platform
- Fully Extended is 23.8" Below Triangle Platform
|
Top Wind with 2,000 lb. Capacity
- Travel of 15"
- Top is 16.0" Above Triangle Platform
- Fully Retracted is 5.4" Below Triangle Platform
- Fully Extended is 20.4" Below Triangle Platform
|
Side Wind with 2,000 lb. Capacity
- Travel of 14"
- Top is 13.0" Above Triangle Platform
- Fully Retracted is 9" Below Triangle Platform
- Fully Extended is 23" Below Triangle Platform
|
Top Wind with 5,000 lb. Capacity
- Travel of 15"
- Top is 10.2" Above Triangle Platform
- Fully Retracted is 10.3" Below Triangle Platform
- Fully Extended is 25.3" Below Triangle Platform
|
Optional Accessories
Caster Wheel
|
Jack Foot - 8" Tall
|
Jack Foot - 2" Tall
|
|
|
|
Swing Away Jacks With Casters
- Jack Swings Easily to a Position Parallel With Tongue
- Caster is Built In
- Side Wind Feature
- Comes With Mounting Hardware, No Welding Required
For 1,000 lb. Tongue Weight
- Travel of 10"
- Top is 11" From Center Of O-Ring To Top Of Jack
- Fully Retracted is 13" Below Triangle Platform
- Fully Extended is 23" Below Triangle Platform
|
|
|
F2 Twin Track Trailer Jack - Swivel Jack
- Aluminum Alloy Inner and Outer Tubes, Combined With Twin Alignment Bushings, Ensure a Precision Alignment
- The Anodized Finish Keep The Tubes Virtually Corrosion Free
- Adjustable Mount and Swivel System - Can Be Adjusted To Any Desired Height
- Pull Pin With Ergonomic Grip Makes It Easy To Swivel Into Position For Lifting or Transport
- Twin Track 7" Diameter Wheels Are Designed To Roll Independently To Make Changing Direction Smooth and Effortless
- 5-1/2" Wide Wheel Base Adds Superior Stability
For 1,600 lb. Tongue Weight
|
|
|
Swing Away Jacks With Foot Pads
- Jack Swings Easily to a Position Parallel With Tongue
- Foot Pad is Built In
- Top Wind Feature
Designed To Be Attached With "O" Ring. If Trailer Does Not Already Have It, You Must Weld
On The Supplied Bracket (which has the "O" Ring). For 2,000 lb. Tongue Weight
- Travel of 10"
- Top is 4" From Center of O-Ring to Top of Jack
- Fully Retracted is 11" Below Triangle Platform
- Fully Extended is 21" Below Triangle Platform
|
Designed To Be Attached With "O" Ring. If Trailer Does Not Already Have It, You Must Weld
On The Supplied Bracket (which has the "O" Ring). For 5,000 lb. Tongue Weight
- Travel of 10"
- Top is 4" From Center of O-Ring to Top of Jack
- Fully Retracted is 11.25" Below Triangle Platform
- Fully Extended is 21.25" Below Triangle Platform
|
Designed To Be Attached With Pin and Clip. If Trailer Does Not Have The Bracket, You
Must Weld On The Supplied Bracket. For 2,000 lb. Tongue Weight
- Travel of 10"
- Top is 4.0" From Center Of Swivel To Tp of Jack
- Fully Retracted is 11" Below Triangle Platform
- Fully Extended is 21" Below Triangle Platform
|
Designed To Be Attached With Pin and Clip. If Trailer Does Not Have The Bracket, You
Must Weld On The Supplied Bracket. For 5,000 lb. Tongue Weight
- Travel of 10"
- Top is 4" From Center Of Swivel to Top of Jack
- Fully Retracted is 11.25" Below Triangle Platform
- Fully Extended is 21.25" Below Triangle Platform
|
|
|
Stabilizer Jack
- Adjusts From 11 1/2" to 16 134" Height
- 400 lb. Lift Capacity
- Swivels UP When Not In Use
Stabilizer Jack
|
Jack Handle (requires only one if you are purchasing multiple jacks)
|
|
|
Scissor Stabilizer Jacks
- 24" Set of Two
- Each Heavy Duty Jack includes a large 5" by 8" rectangular steel base plate and frame mounting plate
- All scissor arms are engaged by means of tooth gear design to ensure engaged straight vertical extension and retraction
- The jack is black e-coat and the handle is zinc plated for long life
- The jacks extend from 4" to 24-3/16" and have 5,000 lbs. capacity per jack
- Jacks come with 1 handle per set
|
|
Power Tongue Jack by Tainium
- 4,000 lb. Electric Tongue Jack
- The Most Efficient and Effective Jack On The Market
- Die-Cast Metal Jack head - Strongest metal head On The Market
- Emergency 3/8" Crank Handle Included If battery Goes Dead
- Precision Gear Housing Efficiently Increases Strength and Longevity
- Low Friction/Precise Gear ratio
- LED Front Light For Low Battery draw & Helps When Working At Night
- Adjustable Drop Foot - Quickly Lift and Lower Trailer With Less Wear and Tear on The Jack and Battery
- Just Push a Button To Quickly Raise or Lower the Jack
- Water Resistant Switches
- Jack Is Black
|
|
Power Tongue Jack by Atwood
- Atwood Power Jacks use a Powerful 12 Volt Weather Resistant DC Motor with Slip Clutch Which is Protected by a Rugged Polyethylene Cover
- Permanently Lubricated
- Just Push a Button To Quickly Raise or Lower the Jack
Economy Jack with 1,500 lb. Capacity
|
Deluxe Jack with 2,500 lb. Capacity and Courtesy Light To Help Hooking and Unhooking at Night
|
Heavy Duty Jack with 3,500 lb. Capacity and Courtesy Light To Help Hooking and Unhooking at Night
|
|
|
Fastway - Flip Jack Foot
- Tired of hauling around and stacking up old 2x4s, just so you can get a little more height from your jack?
- The new Fastway® Flip™ takes care of those hassles for good.
- The Flip jack foot attaches permanently to the bottom of your jack's inner tube.
- As you extend your jack, the Flip jack foot extends down, and locks into place.
- When you raise your jack, the Flip jack foot automatically tucks up under the frame and out of the way!
|
The Fastway® Flip jack foot adds six inches automatically to your 2" jack (1-3/4" outside dimension inner jack tube).
|
|
The Fastway® Flip jack foot adds six inches automatically to your 2-1/4" jack (2" outside dimension inner jack tube).
|
- Click Here To View The Video of the Flip Jack Foot & All Fastway Products
|
|
Rapid Jack
- The Rapid Jack Has Multiple features
- The Rapid Jack IS the best way to help fix a Flat tire on your multi-axle trailer
- Get the Rapid Jack out of the bed of your truck
- Throw the small end under a good tire
- Drive the trailer up the Rapid Jack and change the flat
- Drive off the Rapid Jack and throw it in the bed of the truck. WHAT COULD BE EASIER!
- Flip It On Its Side and Use This To Put The Jack On IT To Keep Your Trailer Safe & Secure On All Surfaces:
- Mud
- Sand
- Gravel
- Dirt
- Asphalt
- Concrete
- Designed To Handle Loads Up To 15,000 lbs.
- Finally, You Can Use It To Level The Trailer By Driving The Trailer Up Until It Is Level
|
|
Hand-E-Blok Jack Support
- Use This To Keep Your Trailer Safe & Secure On All Surfaces:
- Mud
- Sand
- Gravel
- Dirt
- Asphalt
- Concrete
- Designed To Handle Loads Up To 15,000 lbs.
- Because It Is Made of 100% Recycled Plastic, It Helps Reduce Corrosion On Your Jack, At The Same Time Protecting The
Environment
- Can Be Used With Post, Wheel, and Plate Tongue Jacks
|
|
Tire Chock & Tongue Jack Caster Wheel Dock Combo
- Complete Trailer Docking System
- Made From High Impact Polymer
- Mounting Holes Provided To Secure To Solid Surface
- Reduces The Risk of Trailer Roll
- Fits Most trailer Wheels
- Includes 2 Wheels Chocks & 1 Tongue Jack Caster Wheel Dock
|
|
