B&W Under-bed Gooseneck Hitches
To Read Instructions, You Must Have Adobe Acrobat Installed On Your Computer. If You Do Not
Have It, Please Click Here the Reader
B&W Turnover Ball
- Our Most Popular Model
- To Remove Ball:
- Pull Retaining Pin Handle Located in Driver's Wheel Well
- Lift The Ball Out and Flip Over
- Drop It Back Into Socket
- Provides a Level Bed when the Ball Has Been Turned Over
- No Welding. Hitch Assembly Bolts Across Frame Underneath Bed
- Only Requires a 4" Hole Drilled Into Bed For the Ball, and Four 1/2" Holes for the Safety Chain Loops
- Works With A Bed Liner
- Rated at 30,000 lbs.
- Rail Kits Designed For Chevy, Dodge, Ford, Nissan and Toyota Trucks. Rated To Match Manufacturer's Vehicle Weight Ratings
- Chevy
- Dodge
- Ford
- Nissan
- Toyota
- Flat Bed Kit
|
|
B&W Optional Accessories
Gooseneck Extender - For Short Bed Trucks
- Allows 4 More Inches of Turning Clearance Between Truck Cab and Front of Trailer
- Note: Cannot Be Used With a Drop-In Bed Liner. The Ball Does Not Go Down Far Enough For
Pin To Latch
|
Gooseneck Extender - Specifically For 2008 Toyota Tundra B&W Kit 1257
- Allows 4 More Inches of Turning Clearance Between Truck Cab and Front of Trailer
- Note: Cannot Be Used With a Drop-In Bed Liner. The Ball Does Not Go Down Far Enough For
Pin To Latch. This is Only for 2008 Toyota Tundra Kit 1257
|
3" Ball
|
Replacement 2 5/16" Ball
|
Hi-Rise Ball, 1" Higher Than Regular Ball. Note: Drops Rating of Hitch to 20,000 lbs.
|
Inverted Ball Coupler
|
Inverted King Pin
|
Eyelet
|
Companion 18K 5th Wheel Hitch Adapter
- 18,000 lbs. Gross Trailer Weight
- 3,500 lbs. Hitch or Tongue Weight
- Cam Action Lever Makes It Easy To Hook and Unhook From Trailer
- Side Swivel Motion Controlled With Shock Absorbers, 7 Degrees of Side-to-Side Motion
- Mounts To The B&W Turnover Ball Gooseneck System Listed Above
- Easy Adjustment of Height and Lateral Positions
- Click for Instructions for Companion 5th Wheel
|
|
|
Valley Under-bed Gooseneck Hitches
valley Stow-A-Ball Gooseneck Hitch
- To Remove Ball:
- Pull Retaining Pin Handle Located in Driver's Wheel Well
- Lift The Ball Out and Flip Over
- Drop It Back Into Socket
- Provides a Level Bed when the Ball Has Been Turned Over
- No Welding. Hitch Assembly Bolts Across Frame Underneath Bed
- Only Requires a 4" Hole Drilled Into Bed For the Ball, and Four 1/2" Holes for the Safety Chain Loops
- Works With A Bed Liner
- Rated at 30,000 lbs.
- Ball Rotates In The Socket - Eliminates Coupler Binding
- Rail Kits Designed For Chevy, Dodge, & Ford. Rated To Match Manufacturer's Vehicle Weight Ratings
- Chevy
- Dodge
- Ford
|
|
Draw-Tite Under-bed Gooseneck Hitches
Draw-Tite Under-Bed Gooseneck Hitch
- To Remove Ball:
- Pull Retaining Pin Handle Located in Driver's Wheel Well
- Lift The Ball Out and Flip Over
- Drop It Back Into Socket
- Provides a Level Bed when the Ball Has Been Turned Over
- Heavy-Duty Handle Uses Positive Locking to Engage Ball. This Is The Best Handle &
Locking System On The Market
- No Welding. Hitch Assembly Bolts Across Frame Underneath Bed
- Only Requires a 4" Hole Drilled Into Bed For the Ball, and Four 1/2" Holes for the Safety Chain Loops
- Works With A Bed Liner
- Rated at 30,000 lbs.
- Rail Kits Designed For Chevy, Dodge and Ford Trucks. Rated To Match Manufacturer's Vehicle Weight Ratings
|
|
Cushioned Gooseneck Ball Adapter
Cody Cushioned Gooseneck Ball
- Replaces Your B&W or Cody Hitch Ball (must order the correct one below)
- The Inexpensive & Unique Cody Cushion Allows You To Enjoy The Ride Qualitites Of An Expensive
Air Ride System As Used On Modern Trucks
- Increasing Comfort By Ironing Out Road Seams & Bumps Isn't The Only Advantage Of The Cody Cushion -
By Greatly Reducing The Hammering Action Between The Trailer & Hitch, The Shock Absorber Effect Is
Very Beneficial To Your Tow Vehicle, Trailer & The Hitch Itself
- Adjustable Air Spring For Load Specific Cushioning
- Rated For Up Tp 6,000 lbs. Vertical Tongue Weight & 30,000 GVW
For B&W Turnover Ball Gooseneck Hitch
|
For Cody Gooseneck Hitch
|
|
|
Above Bed Gooseneck Hitches
25K Draw-Tite Gooseneck Hitch
- 25,000 lbs. Capacity
- Utilizes The Same Rails As The 5th Wheel Hitches
- Easy Installation and Removal
- 2 5/16" Heat Treated Ball
- Rail and Bracket Kit Not Included
Installation Kit, includes Rails, Brackets and Bolts
|
Rails Only
|
Brackets and Hardware Kit
|
|
|
Curt 25K Spyder Gooseneck Hitch
- 25,000 lbs. Capacity
- Utilizes The Same Rails As The 5th Wheel Hitches
- Easy Installation and Removal
- 2 5/16" Heat Treated Ball
- Rail and Bracket Kit Not Included
Installation Kit, includes Rails, Brackets and Bolts
|
Rails Only
|
Brackets and Hardware Kit
|
|
|
Pro Series Gooseneck Hitch
- 25,000 lbs. Capacity, 6,250 Gross Tongue Weight
- Utilizes The Same Rails As The 5th Wheel Hitches
- Easy Installation and Removal
- 2 5/16" Heat Treated Ball
- Rail and Bracket Kit Not Included
|
|
Valley 25K Gooseneck Hitch
- 25,000 lbs. Capacity
- Utilizes The Same Rails As The 5th Wheel Hitches
- Easy Installation and Removal
- 2 5/16" Heat Treated Ball
- Rail and Bracket Kit Not Included
|
|
Remov-A-Ball Gooseneck Hitch by Draw-Tite
- Allows Unrestricted Use Of Truck Bed Area
- 2 5/16" Forged, Heat Treated Ball. 3" Ball Optional
- Magnetic Cover To Protect Ball Hole and Lever Slot
- Platform Rated For 30,000 lbs. Gross Trailer Weight
- Rail Kits Designed For Chevy, Dodge and Ford Trucks. Rated To Match Manufacturer's Vehicle Weight Ratings
- Gooseneck Hitch Platform #DT6300 Required, Along with One of the Following Rail Kits
- Options:
- Replacement 2 5/16" Ball
- Replacement 3" Ball
|
|
Gooseneck Extended Couplers
SB1 by PopUp for Round Trailer Coupler Tubes
- Provides 9" Offset Between Truck and Trailer
- 2 5/16" Coupler
- More Trailer Swing
- Easier Hook-up
- Fits Standard 4" I.D. Round Trailer Coupler Tubes
- 24,000 lbs. Gross Trailer Weight, 6,000 lb. Gross Tongue Weight
- Includes Coupler Release cable & Hardware
|
|
SB2 by PopUp for Square Trailer Coupler Tubes
- Provides 9" Offset Between Truck and Trailer
- 2 5/16" Coupler
- More Trailer Swing
- Easier Hook-up
- Fits Standard 4 1/2" I.D. Square Trailer Coupler Tubes
- 24,000 lbs. Gross Trailer Weight, 6,000 lb. Gross Tongue Weight
- Includes Coupler Release cable & Hardware
|
|
Gooseneck Accessories
Gooseneck Lock
- 3/4" Heavy Duty Steel Locking Pin
- Fits Hammerblow, Stallion, Superior & T.E.M. Couplers
|
|
Home | Accessories |
Bike and Cargo Racks | Brake Controls |
5th Wheel Hitches
Gooseneck Hitches | Hitch Covers |
Tow Bars | Trailer Accessories
Trailer Hitches | Truck Accessories |
Wiring Products | Request Estimate
Contact Us
(c) Copyright 2008 Hitch Corner, Inc.
10677 W. Centennial Rd. #103
Littleton, CO 80127
1-877-66HITCH (664-4824)
|
